
2. Wireless Manual Flash With Varied Flash Output
You can set a different flash output for each slave unit (A, B, and C) as follows.
1
2
On the master unit, press the
< > button.
Press the < 


> button and
select .
•Pressing the < > button changes the selection in the following loop:
Flash output
(Off)
3 Press the < > button to select
ON A:B or A:B:C.
| • | ON A:B or A:B:C will blink. | ||||||
4 | Press the < | > button. | ||||||
• | A and the flash output display will blink. | |||||||
| Press the < |
|
|
| > or < |
| > button to set | |
5 the flash output for A. |
| |||||||
6 | Press the < | > button. | ||||||
• | B and the flash output display will blink. |