Canon 550EX manual FEB Flash Exposure Bracketing

FEB (Flash Exposure Bracketing)

5 Check that the subject is within the flash range displayed on the 550EX’s LCD panel.

6 Check that the and icons are displayed in the viewfinder, then take the picture.

7 Take the remaining two bracketed shots. (If necessary, repeat steps 4 to 6.)

Correct exposure. Decreased exposure by 1 stop. Increased exposure by 1 stop.

•The film advances according to the camera’s current film advance mode.

•Before taking the picture, make sure the flash is ready by checking that the 550EX’s pilot lamp is red or the icon is displayed in the viewfinder. If the flash is not ready,

only normal AE mode pictures can be taken. The (single-frame) film advance mode is recommended.

•When the flash is ready, you can continue taking the bracketed flash shots.

CF	Custom Function CF-1 can prevent the FEB setting from canceling automatically after the three
	bracketed flash shots are taken. See page 113.
CF	Custom Function CF-2 can change the sequence of the bracketed flash shots. See page 113.

89