4. Setting the Slave ID
With multiple slave units, a slave ID can be assigned to distinguish a slave unit as being the main flash or fill flash. A flash ratio can thereby be set. Three slave IDs are available: A, B, and C.
1 To set a slave unit’s slave ID, press
the < 
> button and select
.
• Pressing the < 
> button changes the selection in the following loop:
|
|
|
|
|
|
|
| (Off) |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| |||||
| Press the < |
|
|
| > or < |
|
|
| > button to set | |||||
2 the slave ID (A, B, or C). | ||||||||||||||
3 | Press the < |
|
|
|
|
|
|
| > button. | |||||
• The |
|
| icon and slave ID will be | |||||||||||
displayed.
If you want all the slave units to fire at the same flash output, you need not assign a slave ID.
56
