Manual Flash Mode
4 Press the < 
> or < > button to set the desired flash output.
• Each time the button is pressed, the flash output changes by one stop.
5 Press the < 
> button again. The manual flash output display will stop blinking and remain displayed.
6 Focus the subject.
• When you press the shutter button halfway, focus will be achieved and the aperture and flash range (bar segment) will be displayed on the LCD panel.
7 Checklens. the focusing distance on the
8 Check the flash range on the LCD panel. If the flash range does not match the focusing distance, change the aperture until it does match.
• You can also change the flash output until the flash range matches the focusing distance.
9 Check that the 
icon is displayed in the viewfinder, then take the picture.
• If there is a large difference between the flash range and focusing distance, change the flash output or use a larger aperture until they match.
• To obtain a more precise flash exposure, use a
94
