Chapter 3 Paper Handling 3-25
N❍Printing on banner paper requires quite a bit of ink. If you think
your BJ cartridge may run out of ink,use a new BJ cartridge.
❍For best print results on banner paper,use light design patterns.
❍To prevent ink from running over the edges ofthe sheet, print
within the margins shown in the previous illustration.
❍Open the front cover.Use both hands to open the front
cover.
❍Set the paper thickness lever to the right.
❍Close the front cover.
❍The maximum length you can use is six sheets (66 inches
or 1676 mm).
❍Always leave an extra sheet at the end of the banner—just
in case the type runs over.
Cut the banner
at a crease
according to the
length you need.
Set the paper
thickness lever for
banner paper
Paper Handling