Canon D680 manual FAX Settings

FAX SETTINGS

		Name	Descriptions
USER SETTINGS			The basic operation settings in the Fax mode can be
			specified.
1.TEL LINE SETTINGS			Specify the telephone line settings.
1.USER TEL		NO.	Your telephone and fax number can be registered.
			(→ p. 2-4)
2.TEL	LINE	TYPE	Selects the telephone line type. (→ p. 2-7)
TOUCH TONE			The telephone line is set for touch tone dialing.
ROTARY PULSE			The telephone line is set for rotary pulse dialing.
3.TX	START	SPEED	Sets the transmission speed for all documents you send.
			33600bps/14400bps/9600bps/7200bps/4800bps/
			2400bps
4.RX	START	SPEED	Sets the transmission speed for all documents you receive.
			33600bps/14400bps/9600bps/7200bps/4800bps/
			2400bps
2.UNIT NAME			You can register your name (or your company name).
			(→ p. 2-5)
3.TX TERMINAL ID			Prints your ID (transmitting terminal ID) on each page
			you transmit. (→ p. 2-3)
1.TTI	POSITION		OUTSIDE IMAGE: Terminal ID is printed outside the
			image border.
			INSIDE IMAGE: Terminal ID is printed inside the
			image border.
2.TEL NUMBER MARK			Selects the prefix for the identification header number.
			FAX, TEL
4.DENSITY CONTROL			Sets the density of the documents.
LIGHT			Sets for dark documents.
STANDARD			Sets for the documents of normal density.
DARK			Sets for light documents.
5.PROG 1-TOUCH KEY			Programs a fax function into the One-Touch key. The
			programmed fax function will be executed by directly
			pressing the corresponding One-Touch key. You do not
			need to press Function before pressing the One-Touch
			key.
01 - 12			Select the One-Touch key (01 to 12) in which you want
			to program the fax function.
USE			Uses PROGRAM 1-TOUCH KEY.
			The following functions can be programmed:
			1.REPORT;
			2.DELAYED TX;
			3.FAX MONITOR;
			4.MEMORY REFERENCE;
			5.BOOK SENDING.
DO	NOT	USE	Disables PROGRAM 1-TOUCH KEY.
			(The factory default setting is in bold face.)

9-4