Canon D680 manual Print Error Only

	Name		Descriptions
6.OFFHOOK ALARM
			Enables/disables the offhook alarm that alerts you when
			the handset is not in the handset cradle.
ON			After reception, the offhook alarm sounds when the
			handset of extension telephone is left off the hook.
OFF			No offhook alarm.
REPORT	SETTINGS		Sets the report setting.
1.TX	REPORT		Enables/disables automatic printing of a transmission
			report.
OUTPUT NO			No report is printed.
PRINT ERROR		ONLY	Prints a report only when a transmission error occurs.
	REPORT WITH TX IMAGE		If you select PRINT ERROR ONLY or OUTPUT YES,
			enables/disables printing of the first page of the fax under
			the report.
	ON		Prints a first page only when a transmission error occurs.
	OFF		No first page is printed.
OUTPUT YES			Prints a report every time you send a document.
2.RX	REPORT		Enables/disables automatic printing of a reception report.
OUTPUT NO			No report is printed.
PRINT ERROR		ONLY	Prints a report only when a reception error occurs.
OUTPUT YES			Prints a report every time you receive a document.
3.ACTIVITY REPORT			Enables/disables automatic printing of an ACTIVITY
			REPORT after every 20 transactions.
ON			Prints the ACTIVITY REPORT.
OFF			No ACTIVITY REPORT is printed.
TX SETTINGS			Sets the transmission functions.
1.ECM TX			ECM (error correction mode) transmission is turned on
			or off.
ON			All transmissions are conducted with ECM if the other
			party’s fax supports ECM.
OFF			ECM is turned off.
2.PAUSE TIME			Sets the length of the pause you insert into a dialing
			sequence.
			1 to 15 SEC (2 SEC)

(The factory default setting is in bold face.)

9

Setting the Additional Functions

9-5