Chapter 8 ISIS/TWAIN Driver Settings
Apply first page size to next pages
When [Scan Ahead] is selected in the settings of the application program, this setting is enabled and the document size of the first page detected with auto detection is applied to the next pages. This minimizes the reduction in scanning speed caused by the auto detection of document sizes.
IMPORTANT
This setting is not enabled for application programs that do not use the scan ahead setting. In CapturePerfect, [Scan Ahead] is selected.
Border Removal
Select this check box to replace black borders surrounding scanned images with white.
Punch Hole Removal
When scanning a document with punch holes, the holes appear as black spots on the scanned image. Select this check box to remove the black spots from scanned images.
IMPORTANT
If punch holes are located within text or graphics in the document, they may be misidentified as graphics, and may not be removed.
[Reverse Image] Check Box (TWAIN Driver Only)
Select this check box to output images scanned in black and white (binary) with black and white reversed.
IMPORTANT
This is not available when the mode is
Buttons
[Others] Button
Click this button to display the Other Settings dialog box.
[Orientation] button (only when opened from the extended version of the Advanced Settings dialog box)
Click this button to display the Orientation Settings dialog box.
[Gamma] Button
Click this button to display the Gamma Settings dialog box.
[About] button (only when opened from the extended version of the Advanced Settings dialog box)
Click this button to display the driver version information.
[OK] button
Click this button to accept changes and close the Basic Setup dialog box.
[Cancel] button
Click this button to reject changes and close the dialog box.
[Help] button
Click this button to display help for this dialog box.