Chapter 3 Basic Operation

4. Scanning

Scanning operations can be controlled by a scanning application program such as the CapturePerfect 3.0 software included with the scanner, or directly from the control panel of the DR-7090C, using the Job Function.

This section describes the Job Function and provides an overview of CapturePerfect 3.0.

IMPORTANT

When the conditions for scanning require a large amount of the computer’s memory, scanning may not be possible if the memory is insufficient. If a memory error appears during scanning, exit the application and change the scanning conditions before attempting to scan again. (See “Before Use” on p. 8-2.)

About the Job Function

The Job Function enables you to use the Job Registration Tool to register different jobs which can then be selected for scanning by pressing the Job key on the control panel.

Job registration stores scanning condition settings, image file format selection, save destination, and image data processing settings for each job to be used with the Job Function.

Hint

The Job Registration Tool is a TWAIN-compliant application that is installed along with the ISIS/TWAIN driver. See Chapter 9 “Job Registration Tool Settings” for details.

Save image to

 

specified folder.

Output to printer

(Network)

 

DR-7090C

Send image as an

e-mail attachment.

 

■Executing Jobs

The Job function has the capabilities listed below, and jobs can be registered using the Job Registration Tool.

•Images can be saved to a shared folder or other specified folder.

•Images can be sent as e-mail attachments (e-mail application not required).

•Images can be output to a specified printer.

Use the following procedure to execute jobs that have been registered by the Job Registration Tool.

1.Set the Events function. (See “Setting the Events Function” on p. 3-13.)

2.From the Windows task bar, click [Start] ➔ click [All Programs] ➔ [Canon DR-7090C] ➔[Job Registration Tool].

3-11