Chapter 8 ISIS/TWAIN Driver Settings

1. Before Use

An application program that supports the ISIS or TWAIN driver is required to use the DR-7090C. The DR-7090C requires that it be selected for use as a scanner. The supplied CapturePerfect 3.0 application uses the ISIS driver. This section describes how to select the scanner using CapturePerfect 3.0 (an ISIS-compatible application program).

As the scanner selection procedure depends on the application program being used, refer to your application’s user’s manual as needed to select the scanner.

IMPORTANT

•When the conditions for scanning require a large amount of the computer’s memory, scanning may not be possible if the memory is insufficient. If a memory error appears during scanning, exit the application and change the scanning conditions before attempting to scan again.

•Configurations that use the computer’s memory include the following. If memory becomes insufficient, consider changing these configurations.

Mode (24-bit Color), Dots per inch (600 dpi), Page Size (Auto-detection),Deskew

Hint

The Job Registration Tool is a TWAIN-compliant application dedicated to the DR-7090C, and requires no scanner selection.

1. From the Windows task bar, click [Start] ➔ click [All

CapturePerfect 3.0 starts.

Programs] ➔ [CapturePerfect 3.0] ➔ [CapturePerfect

 

3.0].

 

8-2