Chapter 1 Before You Start Using the Scanner

e Job Keys

Use these keys to scroll through registered job numbers (01 through 99) on the display panel. (See “About the Job Function” on p. 3-11.)Pressing the Start key while a job number is displayed starts the scanning of the document and forwards the scanned image to the destination registered for the job.

f New File Key

This key is active for applications that support batch separation. This key lights when pressed or in accordance with the application’s batch separation settings. Scanning the next document while this key is lit causes the scanned image to be stored in a different file or folder than the previously scanned document.

g Start Key

The Start key lamp lights when the key is enabled by the Count Only Mode or the application’s settings. Pressing the Start key while its lamp is lit causes scanning to start.

h Stop Key

Pressing this key stops an ongoing scanning operation. This key is also used to cancel a mode setting and clear an error indicator from the counter display area.

1-13