Chapter 5 Maintenance

1. Changing the Stamp Cartridge

When using the optional stamp unit (see p. 1-14)to stamp scanned documents, you should use the following procedure to replace the stamp cartridge whenever the stamp mark becomes smudged or faint. Contact your sales reprentative or service representative to purchase a new stamp cartridge.

1.Open the feeder cover.

Operate the opening lever, and then slowly raise the cover until it stops.

3.Use a pair of tweezers or some similar tool to remove the old stamp cartridge.

2. Open the feeder guide, and then open the inner

 

cover.

4. Insert a new stamp cartridge.

The feeder guide has a green tab, while the inner cover

 

located under the feeder guide has a light blue tab.

 

Inner Cover

Stamp Cartridge

Feeder Guide

IMPORTANT

•When installing the stamp cartridge, make sure that the stamp does not protrude outside the hole.

•Improperly installing the stamp cartridge can cause paper jams.

5-2