Canon MF5650 manual Removing Jammed Paper from the ADF, Troubleshooting

Models: MF5650

1 84
Download 84 pages 2.31 Kb
Page 62
Image 62
14 Insert the cassette to the machine.

12 Push the paper release levers back to their original position and close the face up cover.

IMPORTANT

Be sure to push the paper release levers back to their original position. If the levers are left pushed down, the paper jam error will not be resolved.

Never push down the paper release levers while printing. This could result in damage to the fixing assembly.

13 Insert the cartridge back into the machine, then close the front cover.

For details, see "Replacing the Cartridge," on p. 8-6.

Removing Jammed Paper from the ADF IMPORTANT

After you replace the cartridge and close the front cover, the machine should be ready for operating. If the machine returns to the ready state for operating, troubleshooting has been successful. If the machine does not return to the ready state for operating, confirm that the paper release levers are pushed back to their original position, and check to see that jammed paper is not left in the machine.

14 Insert the cassette to the machine.

Removing Jammed Paper from the ADF

When the document jams in the ADF, the LCD displays <CHECK DOCUMENT>, or <DOCUMENT TOO LONG>.

1Open the ADF and gently remove the jammed paper from the ADF. NOTE

Do not open the platen glass cover until the jammed paper is removed. Doing so will result in damaging the document and the paper.

1Open the ADF and gently remove the jammed paper from the ADF.

9

Troubleshooting

9-6

Page 62
Image 62
Canon MF5650 manual Removing Jammed Paper from the ADF, Troubleshooting, Insert the cassette to the machine