Canon MF5650 manual Scanned Area of a Document, Setting Up Documents, Document Handling

3

Document Handling

Scanned Area of a Document

The shaded area in the illustration below shows the scanned area of a document. Make sure your document's text and graphics are within this area.

MAX. 5.5 mm	MAX. 5.5 mm
	MAX. 3 mm
Feeding
direction

MAX. 3 mm

Setting Up Documents

For scanning, place your documents on the platen glass or load them in the ADF. Where you set up your documents depends on the size and type of documents you want to scan. (See "Document Requirements," on p. 3-1.)

Placing a Document on the Platen Glass

1Open the platen glass cover.

2Place your document face down on the platen glass.

Use the paper size marks on the left side of the platen glass to position a document.

•If your document conforms to a standard paper size (e.g., A4 or A5), align the document between the appropriate paper size marks.

•If you do not know the size of your document, or if your document does not match any of the paper size marks, align the centre of your document with the → mark.

3-2