Canon MF5650 manual Document Handling, Document Requirements, Problem Documents

Document Handling

3

CHAPTER

This chapter describes the types of documents you can scan, copy or send with this machine and how to set them on the platen glass or in the ADF.

Document Requirements

The documents you place on the platen glass or loaded in the ADF for copying, scanning, or sending must meet these requirements:

	Platen Glass	ADF
Type of	Plain paper	Plain paper (multiple page documents of the
Document	Thick documents	same size, thickness, and weight or one page
	Photographs	documents)
	Small documents (e.g., index cards)
	Special types of paper (e.g., tracing paper*1,
	transparencies*1, etc.)
	Book
Size (W x L)	Max. 216 mm x 297 mm	Max. 216 mm x 356 mm
		Min. 148 mm x 105 mm
Quantity	1 sheet	Max. 30 sheets or paper stack within 8 mm
		thickness including curled sheets (guaranteed)
		Max. 50 sheets*2 or paper stack within 8 mm
		thickness including curled sheets
		(temperature: 15°C to 27°C, humidity: 20% to
		80%) (reference)
Weight	Max. 2 kg	64 g/m2 to 105 g/m2/document

*1 When scanning, copying, and sending a transparent document such as tracing paper or transparencies, place a

piece of plain white paper behind the document. *2 80 g/m2 paper

NOTE

When making copies of a small size document, the copy speed may be slightly slower than usual.

Problem Documents

•Make sure any glue, ink, or correction fluid on the document is completely dry before placing it on the platen glass or loading it in the ADF.

•Remove all fasteners (staples, paper clips, etc.) before loading the document in the ADF.

•To prevent document jams in the ADF, do not use any of the following:

- Wrinkled or creased paper		- Carbon paper or carbon-backed paper
- Curled or rolled paper		-	Coated paper
-	Torn paper	-	Onion skin or thin paper
-	Hole-punched paper

3-1