Field Test Unit Software

Note:- all programs on the cassette are stored twice. This means

the

message

“SKIP : FTUC” might appear on the screen first before

the

next file

is loaded

 

8. Type:- NEW then press Return

All FTU programs are now loaded and ready to use.

9.Type:- RUN “FTUC” then press Return

(To begin FTUC operating. Press BREAK key then RUN “LOAD” or RUN “COPY” to begin those programs)

2.4 LOADING “PLOT’ IN 16K RAM FTU

The Model 6302A Software Support (Version V#5.0 or later) requires a 16k memory FTU (Canon X-07), therefore only the Print/Plot Package can be loaded into the FTU If the FTU has been expanded to 24k, then other FTU utilities may also be loaded and the Print/Plot Package may be saved as a RAM file in the FTU.

To load program “PLOT” (the Print/Plot Package):-

1. DELETE all RAM files in the FTU (or perform Step 1. above).

2.Connect cassette player (Step 2. above) and insert tape, side B.

3.Type:- FSET 2300 then press Return

4.Type:- CLOAD “PLOT” then press Return

(The system should respond with ‘Found:PLOT’ and continue to load the program into the FTU)

Note:- don’t save “PLOT” in the RAM file area (in a 16k FTU).

5. Type:- RUN then press Return

(To begin execution of the Print/Plot package).

Section 2. GETTING STARTED

7