Field Test Unit Software
compatibles). If you require to use PDLIO you must purchase that package separately.
g)copy data files and command files between cassette, RAM and the
h) | save | frequently used | (Un)load/Plot operator responses into com- |
| mand | files in RAM | or on cassette. |
3.2 COMMAND FILES
Once the format of the (un)load or print/plot output has been decided, the operator commands (entered into the keyboard in response to the questions listed below) may be saved in a RAM file or on cassette.
This feature saves the operator entering all the responses every time a plot or unload is performed. Instead, the operator simply enters in the command file name and the (un)load or print/plot proceeds automatically using the
Many command files | may be created and saved, allowing command files for |
a variety of loading, | unloading, printing or plotting operations. |
3.3 COPY(ING) FILES
The “COPY” program allows data files or command files to be transferred to/from RAM/cassette or to/from FTU and a host computer. These files must be standard BASIC files in ASCII format (lines terminated with a car- riage return and less than 255 characters in length).
3.3.1 Running COPY
1. Connect datacassette and/or
2.Type:- RUN “COPY” then press Return
3.Answer the following questions:
Section 3. (UN)LOAD, PLOT & COPY | 9 |
