Field Test Unit Software

•Batteries (AA x 4)

•Model 6602E cable to connect FTU to Data Logger

•Model 6401D Mains Power Pack

•Prom with STARLOG Software (already installed)

•Reference Card for (FTU)

1.2.3Switching on the FTU

Ensure that the batteries have been inserted and that the Lock Switch (slide switch, underneath) is in the ON position, then press the ON/BREAK key. The FTU should power on and the following appear on the screen :

Copyright(c) 1983 by Microsoft & Canon 14940 Bytes free

Note, however, that the number of Bytes free may differ from the above as it depends on the size of the file area that has been set (the size of the file area can be changed)

1.2.4 Running a Program

To run a program, use the BASIC command :

RUN"filnam"

where filnam is the name of the file you wish to run.

1.3 CASSETTE STORAGE

Cassettes may be used for long term storage of Programs and data. It is advisable to keep a copy of programs on cassette, as the contents of the file area may sometimes be destroyed.

1.3.1 Attaching the cassette

The cassette cable plugs into the small round DIN-type socket on the right hand side of the FTU. The other end of the cable has three pIugs. These should be plugged into the cassette recorder as follows:

RED

MIC (Input)

Section 1. INTRODUCTION

3