Field Test Unit Software
Enter COMMAND
file name,type
Enter the name. you of
PLot, PRint, Load or Unload
Name of command file,extension (,F is default extension)
the command file you wish to create or use
____
PL = Plot data logger information
PR = Print data logger information
L = Load file into the logger
U = Unload data logger into file
Enter the function you wish PLOT to perform. Either PL to PLOT data, PR to PRINT data, L to LOAD data from storage device to a logger or U to UNLOAD data from a logger to storage device
| Cassette or Ram file | C | = | Cassette storage | ||||
| INPUT file, or input | R | = | Ram storage | ||||
| from Logger? | L = Direct from logger | ||||||
Enter the storage device that data is to be printed/plotted from | ||||||||
|
|
|
|
|
|
|
|
|
| Cassette or Ram file | C | = | Cassette storage | ||||
| INPUT file | R = RAM storage | ||||||
Enter the storage device data is to be loaded from | ||||||||
|
|
|
|
|
|
|
| |
| Cassette or Ram file | C | = | Cassette storage | ||||
| OUTPUT file? | R = RAM storage (24K F.T.U. only) | ||||||
Enter the storage device data is to be unloaded to | ||||||||
|
|
|
| |||||
| Enter Output file | Name of data file,extension (,D is default | ||||||
| name,type | extension) | ||||||
Enter the name you wish give your stored data. This name will be used for subsequent reference to that data
use buffer 7 time? if your logger uses buffer 7 to store the start time, then stored times are used. Y = YES (use stored times)
N = NO (enter start time on keyboard)
If the program in the logger has been created by the STARLOG IBM software package buffer 7 will contain the time of the first data log. This time can be used instead of having to enter a start time manually
12 | Section 3. (UN)LOAD, PLOT& COPY |
