Field Test Unit Software

7.8.2 “F” - FREE

This command will display all files held in RAM and available memory. (See X-07 manual for more details).

7.8.3 “Q” - QUIT

Pressing this key will return the X-07 to BASIC.

7.8.4 “b” - BAUD

This command will allow the user to set the FTU’s communication baud rate. The default is 8000 baud. Users of remote telemetry systems should consult their manual 6213 to decide on the correct baud rate if using a

MODEM.

7.8.5 “s” - S300

This command will cause the FTU-PROM to exit from normal communications with the logger and to assume a “dumb terminal” mode for communications with another terminal.

7.8.6 “x” - TRANSFER

This command will allow the FTU to transfer files between itself and an IBM PC compatible using UNIDATA’s PDL-FTU software version 1.5 or later. File transfer can be done in either direction. Once “x” has been pressed all commands take place from the PC. See software manual 6201 “STARLOG Software Manual” for further details.