Field Test Unit Software

3.4.1 Running LOAD

1. Connect Data Logger to FTU. (connect datacassette)

2.Type:- RUN “LOAD” then press Return (or RUN “PLOT”)

3.Answer the relevant questions described below

3.5 PRINTING & PLOTTING RECORDINGS

The program “PLOT” is used to print or plot the recorded information from the Data Logger. This information may be from stored files in RAM or on cassette or alternatively, “PLOT” will print/plot directly from a Data Logger connected to the FTU.

3.5.1 Running PLOT

1. Connect datacassette or Data Logger to FTU

2. Connect & RESET printer Or plotter to FTU

3.Type:- RUN then press Return (or RUN “PLOT”)

4.Answer the relevant questions described below

3.6LOAD/PLOT - OPERATOR RESPONSES

Question

input from Keyboard input from File; or Create Command

file?
Answers

K = Keyboard entry of commands

F = Commands are to be read from a previously created command file

C = Store entered commands in a command file for future use

Enter the way you wish commands to be entered to the program

Note:- if “C” is selected, the program creates a command fife only. It does

not perform any LOAD/COPY/PLOT function.

 

 

 

...

 

Cassette or Ram

file

C = Cassette storage

COMMAND file?

 

R = Ram storage

Enter the storage

device

of the command file

 

 

 

 

 

Section 3. (UN)LOAD, PLOT& COPY

11