External Power Sources ~~1
Macro Ring Lite MR-14EX can use either of the following two external power packs. For details on the power pack, refer to the Instructions of the respective power pack.
(1)Compact Battery Pack CP-E2
Uses six size-AA alkaline, nickel-hydride, or lithium batteries.
(2)Transistor Pack E
Uses Battery Magazine TP (six size-C alkaline batteries) or Ni-Cd Pack TP.
Recycling Time and Flash Count
Internal Power
Sources
External Power
Sources
(Applicable to both or only one flash tube tiring)
Recycling
Power SourceFlash Count
Time (sec.)
| Size-AA alkaline batteries | Approx.0.1-7 | Approx.120-800 |
| Compact Battery Pack CP-E2 | Approx.0.1-4 | Approx, 400-2500 |
| (w/alkaline batteries) |
| | |
| Transistor Pack E (w/alkaline batteries) | Approx.0.1-4 | Approx. 400-2500 |
| Transistor Pack E (wiN i-Cd Pack TP) | Approx. 0.1-3 | Approx. 330-2000 |
•The minimum recycling time applies in the E-TTL or TIL mode while the maximum recycling time applies in the manual or full-output (1/1) mode.
•The minimum flash count applies in the manual or full-output (1/1) mode while the maximum flash count applies in the E-TIL or TTL mode.
•The above specifications are based on Canon'stesting standards .
.. -Evenwhen an~xternalpower source is used, batteries must still be installed in tbeMR-14EX to power itsinternal circuitry.
-TheMR-14EX uses both the internal and external power sources to recycle the flash. Therefore,. the. internalpower source. maybecome exhausted sooner thanthe externalpow~rso~rce. ForproI5m~edflash· photography,keep a spare set of·size-AAbatteries handy fortheinternal. power source.
