Canon MR-14EXl manual Cttl~M~

In the manual flash mode, you can set the flash output from 1/1 (full) to 1/64 power in whole-stop increments. The flash tubes can be fired in one of three configurations: 1. Fire both flash tubes at the same output, 2. Fire flash tube A at a different output from flash tube 8,3. Fire only one of the flash tubes.

Set the camera'sshooting mode to Av or M.

Press the MR-14EX's<MODE>button and select M.

~Pressing the <MODE> button toggles the flash mode between TTL and M.

CTTL~M~

Press the <SEUSET> button.

~The flash output display blinks.

Press the < + > or <- > button to set the desired flash output.

~Each time you press the button, the flash output increases or decreases by one stop.

Press the < SEUSET > button again.

~The flash output is displayed.

Set the camera'saperture.

Focus and take the picture.

•Check that the t icon (flash ready) is displayed in the viewfinder before taking the picture.

60