Canon MR-14EXl manual ~~D atSelecting the Flash Tube IfIItHlni. nnmllOmil! i Iin

~~D at:Selecting the Flash Tube IfIItHlni_. nnmllOm'il! i 'Iin

By firing only one of the flash tubes or by setting a flash ratio for flash tubes A and B, you can create shadows and sculptural lighting effects. You can set the flash ratio from 1:8 to 1:1 to 8:1 (13 levels) in 1/2-stop increments.

*The ETTL flash mode must be set.

*Since the flash exposure is controlled automatically, you need not bother with any flash metering calculations.

*If you set the flash mode to M, see page 39.

The flash tube ID is "A" for the left one and "B" for the right one when you look at the rear of the flash

ring.'

A:B=1:1A:B=4:1

Only flash tube A fired. Only flash tube B fired.

26