Canon MR-14EXl manual Using Slave C w/EOS-10, 1V, 3, 030, Elan 7nE, or 30/33

Using the Wireless Flash System rJIIIIIJm nu ~I~~­

Using Slave C (w/EOS-10, 1V, 3, 030, ELAN 7nE, or 30/33)

You can fire flash tubes A and B and slave C at the same time. A correct flash exposure is obtained with flash tubes A and B together, and slave C alone is set automatically to obtain a correct exposure. Slave C is used to eli"minate background shadows or to create accent lighting.

Imiml A : B C +0

:~D8:1- 4:1- 2:1- ~ -1:2 -1:4 -1:8 at:

Check that Imiml A : B C is displayed on the LCD panel_

•If it is not displayed, press the <RATI0 > button until it is displayed. (-7p.42)

Check that the master unit'spilot . lamp is lit and that slave C is also flash-ready.

Focus and take the picture.

Check that the master unit'sflash exposure confirmation lamp lights.

_	With Type-A cameras, C. Fn-5 can have both the master unit and slave unit
	fire together as one group. (~p.64)
	• While Imiml is not displayed on the master unit, you can just position the
	slave unit as desired.	.

45