Canon MR-14EXl manual Flash mode must be set to Ettl

With Type-A cameras, you can set FE (flash exposure) lock. This is the flash version of AE lock. With FE lock, you use spot metering to obtain the correct flash exposure reading for a specific area of the subject.

*The flash mode must be set to ETTL.

Select a shooting mode with the camera.

Focus the subject.

Aim the viewfinder'sspot metering circle over the area of the sUbject to be metered. Then press the < FEL > button on the camera. FE lock remains in effect for 16 sec.

~The MR-14EX fires a preflash to obtain an exposure reading. The reading is retained temporarily in

memory.

~ FEL 5.b ~ FEL is displayed on the viewfinder bottom for 0.5 sec.

•You can obtain a new FE lock reading by pressing the < FEL > button again.

•To cancel FE lock, wait until 16 sec. elapse or press the <MODE>, <AF>, or < ~ > button on the camera.

Focus the subject.

30