Specifications, 153, System, Memory Card | Canon XL H1A, XL H1S

Specifications

XL H1S / XL H1A

System

Video Recording System	Rotary head, helical scanning, digital component recording
	HDV	High Definition Video 1080i
	DV	Consumer digital VCR SD system

Audio Recording System	HDV	MPEG-1 audio layer 2, 16 bit (48 kHz), Transfer rate: 384 kbps (2CH)
	DV	PCM digital sound, 16 bit (48 kHz) or 12 bit (32 kHz)

Television System	HD	High Definition Video (HDV) 1080/50i
	SD	CCIR standard (625 lines, 50 fields) PAL color signal
Tape Format	Videocassettes bearing the “MiniDV” mark.
Tape Speed	HDV	18.83 mm/s
	DV	SP: 18.83 mm/s, LP: 12.57 mm/s
Maximum Recording Time	HDV	60 min.
(60 min. cassette)	DV	SP: 60 min., LP: 90 min.

Fast Forward/Rewind Time	Approx. 2 min. 20 sec. (with a 60 min. cassette)
Image Sensor	1/3-inch CCD x 3 (horizontal pixel shift), approx. 1,670,000 pixels
	Effective pixels:		HD	approx. 1,560,000
			SD16:9	approx. 1,560,000
			SD4:3	approx. 1,170,000

Viewfinder	2.4 in. wide, 16:9 aspect ratio, TFT color, approx. 215,000 pixels, RGB delta configuration
Microphone	M/S Stereo electret condenser microphone
Lens Mount	XL interchangeable mount system
AF System	TTL autofocus, manual focusing with focus ring (with the HD 20x L IS III lens)
White Balance	Auto white balance, pre-set white balance (indoor, outdoor), custom white balance, or color
	temperature setting

Minimum Illumination	0.4 lx (with HD 20x L IS Lens, 50i/25F mode, Manual mode, Shutter speed 1/3, F1.6, Gain 18 dB)
Recommended Illumination	More than 100 lx
Subject Illumination Range	0.4 to 100,000 lx (50i/25F)

Memory Card

Recording media	SDHC (SD High Capacity) memory card, SD memory card, MultiMedia Card (MMC)*
Size of Images on the Card	1920 x 1080, 1440 x 1080, 848 x 480, 640 x 480 pixels
File Format	Design rule for Camera File system (DCF), Exif 2.2** compliant, DPOF compliant
Image Compression Method	JPEG compression (Super Fine, Fine, Normal)

*The camcorder’s operations have been tested with SD/SDHC memory cards up to 16 GB. Performance cannot be guaranteed for all memory cards.

**The camcorder supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between camcorders and printers. By connecting to an Exif Print-compliant printer, the camcorder’s image data at the time of shooting is used and optimized, yielding extremely high quality prints.

Additional Information

153

Image 153

Canon XL H1A, XL H1S instruction manual Specifications, 153, System, Memory Card

Contents

PAL35 Important Usage Instructions For Users in the UKEuropean Union and EEA only XL H1S / XL H1A a Broad Range of Capabilities Advanced Professional FeaturesUltimate HD Quality Versatile Artistic Expression Conventions Used in this Manual About this ManualTrademark Acknowledgements Operating modes About the HD/HDV and SD/DV Specifications Contents External Connections Checking the Supplied Accessories Left side view Dial Components Guide Viewfinder unit/Microphone unit HD 20x L is III lens Left side view Right side view Introduction Using tripods Front view Back viewAbout the Terminal Top view Introduction WL-D5000 Wireless Controller Charging the Battery Pack Preparing the Power SupplyAttaching the Battery Pack Remove the battery pack after use Using a Household Power Outlet About the Built-in Rechargeable Lithium BatteryTurn the dial to OFF Attach the DC coupler to the camcorder Charging, Recording and Playback Times Battery PackHDV Maximum Recording Time DV Maximum Recording Time 140 min 205 min 290 min 400 min Attaching and Detaching the Color Viewfinder Unit Preparing the CamcorderAttaching the Color Viewfinder Unit Detaching the Viewfinder Unit Attaching the Eye Cup Attaching and Detaching the Eye CupDetaching the Eye Cup Detach the eye cup as shown in the illustration Dioptric Adjustment Adjusting the Position of the ViewfinderRight/Left Adjustment Forward/Backward Adjustment Using the Viewfinder as LCD Panel Adjusting the ViewfinderPress the Menu button to close the menu Press the lock release button and open the eyepiece adapter Attaching the Microphone Unit Fastening the Grip BeltAttaching the Shoulder Strap Attaching the Adapter Holder Preparing the Lens Mounting the LensRemoving the Lens Preparations Attaching the Lens HoodTighten the lock screw Check that the exposure conditions are appropriate AF Adjustment MF AdjustmentResetting the flange back adjustments Inserting the Batteries Using the Wireless Controller Loading/Removing a Cassette Load/remove the cassetteClose the cassette compartment cover Inserting/Removing a Memory Card Inserting the CardRemoving the Card Selecting Menus and Settings Changing Settings with the Menu Button Setting the Time Zone/Daylight Saving Time Date/Time and Language SettingsSetting the Date and Time Displaying the Date and Time while Recording Changing the Display Language Changing the Date Format Recording When You Have Finished RecordingRecording Before You Begin Recording Power Save Function Power Saving MechanismsLow-angle Recording Standby Button Screen Displays while Recording Reviewing the Recording Selecting the On-Screen DisplaysPress and release the record review button Change the position of the Mode Select switch Selecting the Signal Standard and Aspect Ratio Press the END Search button Locating the End of the Last Scene Custom function Zoom Speed setting Zoom Speed switchZooming Zoom Speed Presetting the Zoom Zoom Preset lenses with zoom preset functionReturning to the Preset Zoom Position Move the Position Preset ON/SET switch to on Push AF using the HD 20x L is III lens Adjusting the FocusAutofocus Temporary Focus Override Manual focus Turn the focus ring to adjust the focusZoom in to telephoto Operate the zoom to reframe the subject Magnifying Record pause, press the EVF Magnifying button Using the Focus Assist Functions Peaking and Magnifying Presetting the Focus Focus Preset lenses with focus preset functionSetting the Focus Preset Speed Returning to the Preset Focus position Macro Shooting Focus Limit Screen display What it means What you should do Using the ND Filter Lenses with built-in ND filter 25F Mode 50i ModeSet the Frame Rate switch to the desired position Selecting the Frame Rate Select SET Setting the Time CodeSet the time code’s initial value Close the menu Synchronizing the Camcorder’s Time Code Connection DiagramGenlock Time Code About the Side Panel Indications Setting the User Bit Displaying the User BitRecording an External User Bit Using the Wind Screen SD Selecting the DV Audio ModeAudio Recording Selecting the Sensitivity of the Front Microphone Using the XLR terminals Using the Front MicrophoneSet the Input Select switch to Front MIC Recording Audio Hiding/Displaying the Audio Level Indicator Adjusting the Audio Recording LevelAutomatic Audio Adjustment Manual Audio Adjustment Embedded Audio Image Stabilizer Lenses with image stabilization function Set the Stabilizer ON/OFF switch to OFF Using the Programmed AE Modes Easy Recording Available controls/functions by programmed AE modeSelecting the Programmed AE Modes Press the lock button and turn the dialPage Available settings Recording in Manual ModeSet the dial to M Select the shutter speed with the Shutter or button Press the Push AE button and hold it pressed down Push AE Recording in Shutter-Priority Tv Mode Available shutter speeds when recording moviesAvailable shutter speeds when recording still images Recording in Aperture-Priority Av Mode Set the dial to AvRing, like the HD 20x L is III lens AE Shift Adjusting the ExposureExposure Lock Set the dial to , Tv or Av Press the EXP. Lock button Gain Fine Tuning GainSelecting the Gain Level Setting the Color Temperature Selecting the White Balance SettingWhite Balance Press the White Balance button Recording with a Custom White Balance Previously Set Setting a Custom White Balance Zebra Pattern Selecting the Zebra Pattern LevelActivating the Zebra Pattern Adjusting the Color Correction Color CorrectionDetermining the Color to be Corrected Activating the Color Correction Skin Detail Function Determining the Tone to be Detected as Skin AreaActivating the Skin Detail Function Selective Noise Reduction Determining the Area to be CorrectedActivating the Selective Noise Reduction Clear Scan To check the current custom key settings Default settingsCustom Keys Following functions can be assigned to the custom keys Activating the Functions with the Custom Key Changing the Custom Keys Setting EVF BW Mode Viewfinder’s B&W mode Audio Level Audio Level IndicatorTC Hold Time Code Hold MAGN.B.LOCK MAGN. Button Lock FB Flange Back Adjustment CP Bkwd KEY Custom Preset Backward KeyFlip EVF Flip EVF SDI Output SDI Output Faders Color Bars/Audio Reference SignalPress the BARS/FADE ON/OFF button Press the Start/Stop button Video Signal Output Standards Standard of Video Output while RecordingStandard of Video Output during Playback Displaying the Viewfinders Screen on an External Monitor Connecting to a Monitor/TV Connection to a High Definition Monitor or Hdtv Using the HD/SD SDI Terminal Using the Component OUT Terminal Using the HDV/DV TerminalExternal Connections Connection to a Standard Definition TV or Monitor Using the Video IN/OUT or S-Video IN/OUT Terminal Using the Scart Adapter Selecting the Audio Channel Audio OutputSelecting the Audio Output Level Selecting the Audio Monitor AUD.M.SET If the button was pressed while the camcorder was recording Digital Video Control HDV/DV Analog Line-InPress the button to stop recording Copyright Precaution Copyright SignalsConcerning Copyright Connecting to a Computer Custom Preset Parameters Custom Preset Settings Select Edit from the column on the left Changing Custom Preset ParametersFrom the bottom bar, select Tune Customization Renaming a Custom Preset File Protecting a Custom Preset FileResetting a Custom Preset File Copying a Custom Preset File to the Memory Card Activating the Custom Preset SettingsReading a Custom Preset File from the Memory Card Press the Custom Preset Select button Reading a Custom Preset File from a Still Image SET Setup Level KNE Knee Point AdjustmentGAM Gamma Curve BLK Black Stretch/Black Press SHP Sharpness CPH Color PhaseHDF Horizontal Detail Frequency DHV Horizontal/Vertical Detail Balance GGN G Gain RGN R GainBGN B Gain RGM R-G Matrix Changing the Custom Function Settings Customized Functions100 Activating a Custom Function File Resetting a Custom Function FileCopying a Custom Function File to the Memory Card Reading a Custom Function File from the Memory Card Custom Function 102 Shcklss WB/GN Shockless White Balance/Gain List of Custom Functions and Setting OptionsZoom Ring Ctrl Zoom Ring Control 103 Focus Ring Ctrl Focus Ring Control Zoom Speed Zoom SpeedButtons OPER.1 Buttons Operation 1/2 Buttons OPER.2 Buttons Operation 2/2 Zoom Indicator Zoom Indicator Display 11 F.AST BW-MOD Focus Assist Function B&W Display ModeColor Bars Color Bars Signal 15 1kHz Tone 1 kHz Reference Audio Signal Resetting a Custom Display File Changing the Custom Display SettingsCustomized On-Screen Displays Copying a Custom Display File to the Memory Card Reading a Custom Display File from the Memory Card List of Custom Display Items and Setting Options Wireless Remote Wireless Remote Display Battery Battery-Related DisplaysTape Tape-Related Icons and Displays Tape Remainder Remaining Time on the Tape 109 Special Playback Modes Playing Back a TapePlayback pause Rewind playback / fast forward playback Slow forward Frame advanceFrame reverse / frame advance Slow reverse / slow forward Index Search Returning to a Pre-marked Position112 Stop the playback Rewind the tape Data Code Date SearchSelecting the Data Code Displaying the Data Code To change the remote sensor mode of the camcorder Remote Sensor ModeTo change the remote sensor mode of the wireless controller Change the custom function Wireless Remote Selecting the Still Image Quality/Size Using a Memory CardChanging the Still Image Quality Changing the Still Image Size 116 File Numbers Recording Still Images on a Memory Card 117Press the Photo button fully If Camera Setup Focus PRI. is set to OFF If Camera Setup Focus PRI. is set to on About the Power Save function Capturing a Still Image from a Tape Reviewing a Still Image right after Recording Screen Displays during Still Image Recording119 Changing the Drive Mode Drive ModeContinuous Shooting/High-Speed Continuous Shooting Auto Exposure Bracketing 121 Metering Mode Connecting a Speedlite Flash Using an Optional FlashUsing the Flash 122 Slideshow Playing Back Still Images from a Memory CardIndex Screen 123 Displaying the Recording Data Image Jump Function124 Press and hold the + or button Erasing a Single Still Image Erasing Still imagesErasing All Images 125 Protecting a Single Still Image Protecting Still imagesProtecting Still Images from the Index Screen 126 127 Initializing a Memory Card Setting Print Orders from the Index Screen Print Order SettingsSelecting Still Images for Printing Print Order Erasing All Print Orders Playback STD Setting Being played back Menu Options and Default Settings129 Additional Information 130 „ Camera Setup 131 „ Audio Setup 132 „ Display Setup 133 „ System SETUP/ 134 „ Custom Preset Submenu Customize Custom Preset „ Custom Function Submenu Customize Custom Function 135 „ Custom Displays 136 137 Settings Memorized and Retained Screen Displays Screen Displays during Recording138 Screen Displays during Playback 139Side panel Message Explanation 140 Camcorder Handling Precautions Maintenance/OthersCleaning Storage About the battery terminal cover Battery Pack Handling PrecautionsTreat the battery pack with care 142 Memory Card Cassette Handling PrecautionsProtecting Tapes from Accidental Erasure 143 Video Heads Built-in Rechargeable Lithium BatteryCondensation Condensation may form in the following cases Power Sources Using the Camcorder AbroadPlayback on a TV Screen 145 Power Source TroubleshootingRecording/Playback Recording Others PlaybackAbout the LCD screen 147 148 System Diagram Availability differs from area to area 149 150 Optional Accessories 151 FU-2000 Color Viewfinder Unit 152 153 SpecificationsSystem Memory Card Power/Others 154Lens CA-920 Compact Power Adapter BP-950G Battery Pack155 Knee User bit 157 Canon Europa N.V