Selecting the On-Screen Displays

You can select the amount of information shown on the screen from full, partial or no display. Repeatedly pressing the EVF DISPLAY button will cycle through the options in the following sequence.

Level 11: All screen displays

Level 2: Customized displays ( 106), date/time2

Level 33: Markers, safety zone guides, date/time2

Level 4: No displays

1This level cannot be selected if [SYSTEM SETUP/ ] [ALL DISPLAY] is set to [DISABLE].

2If [DISPLAY SETUP/ ] [GUIDE INFO] is set to [D/T DISPLAY], the date and time will be displayed; if it is

set to [CUSTOM KEYS], the functions currently assigned to the custom keys will be displayed instead.

3This level cannot be selected if [DISPLAY SETUP/ ] [MARKERS], [SAFETY ZONE] and [GUIDE INFO] are all set [OFF].

The camcorder’s on-screen displays will also appear on a connected external TV or monitor.

Reviewing the Recording

In record pause mode, this function allows you to review the last few seconds of your recording.

Press and release the (record review) button.

The camcorder rewinds the tape, plays back the last few seconds, and returns to record pause mode.

If the current video signal standard is different from the signal standard in which the tape was recorded, the recording will not be played back correctly.

Recording

37

Page 37
Image 37
Canon XL H1A, XL H1S Reviewing the Recording, Selecting the On-Screen Displays, Press and release the record review button