Administration Settings
The Administration menu includes eight administration items:
■IP Setup
■Backup Configuration
■Restore Configuration
■Firmware Upgrade
■Initialize
■Reboot
■System Access
■System Time
■SNMP
Modifying the IP Address Settings
To enable devices on the network to communicate with the Switch, you need to assign an IP address to it
— either by DHCP or by assigning a static IP address.
By default, the Switch performs automatic IP configuration and assigns an IP address to itself. This is necessary for the Discovery application to be able to connect to the Web interface.
Automatic IP Configuration
When you power on the Switch for the first time, it automatically uses the default IP address 169.254.x.y, where x and y are the last two bytes of its MAC address.
Administration Settings | 29 |
To determine the exact IP address that the Switch assigns to itself during auto IP configuration, check the sticker on the base of the Switch. This sticker contains the MAC address and default IP address of the Switch.
To detect its IP information using the automatic configuration process, the Switch goes through the following sequence of steps:
1The Switch tries to configure itself with the default IP address 169.254.x.y, where x and y are converted from the last two bytes of its MAC address.
For example, if the MAC address is 08004E000102, the IP address would be 169.254.1.2. This address is used if the Switch is operating in a standalone mode, or no other switches on the network have this IP address.
The Switch also assigns the subnet mask 255.255.0.0 (default class B mask) to itself.
2If this default IP address is already in use on the network, then the Switch detects this, and increments the last byte of the MAC address by one to generate its IP address.
The IP address would therefore become 169.254.1.3.
3The Switch repeats step 2 until an unused IP address is found.
3Com recommends using automatic IP configuration only for the initial setup. Once you gain access to the Web interface, you should assign an IP address to the Switch (either by using DHCP or assigning a static IP address) to ensure successful communication between the Switch and other network devices.
