Canton 3C16476CS manual Spanning Tree per Port, Remove, Link Aggregation Modify Screen

Models: 3C16476CS

1 79
Download 79 pages 42.53 Kb
Page 47
Image 47
Modify

Modify

Use the Modify tab reassign port members to a link aggregation group.

Figure 43 Link Aggregation Modify Screen

To modify a link aggregation group:

1Select the aggregation group to modify, then click Select.

2Select the ports to add to the goup.

3Click Apply.

Remove

Use the Remove tab delete a link aggregation group.

Configuring Port Settings

47

Figure 44 Link Aggregation Remove Screen

To remove a link aggregation group:

1From the link aggregation group list, select the aggregated group to remove.

2Click Remove.

Spanning Tree per Port

This administrative tool supports the configuration of the Switch to forward, or block and discard 802.1D spanning tree BPDU packets.

Spanning tree is a bridge-based system for providing fault tolerance on networks and can be used to detect and disable network loops. The spanning tree ensures that the optimal path is maintained between spanning tree-compliant networked devices by:

Disabling redundant paths when the main paths are operational.

Enabling redundant paths if the main paths fail.

Spanning tree uses a distributed algorithm to select a bridging device that serves as the root of the spanning tree network. The bridging device known as

Page 47
Image 47
Canton 3C16476CS manual Spanning Tree per Port, Link Aggregation Modify Screen, Link Aggregation Remove Screen