Canton 3C16476CS manual Sample VLAN Configurations, Setting Up Two VLANs on the Same Switch

Models: 3C16476CS

1 79
Download 79 pages 42.53 Kb
Page 40
Image 40
Sample VLAN Configurations

40CHAPTER 4: CONFIGURING THE SWITCH

The Switch will only forward a frame to ports that are members (tagged or untagged) of the VLAN to which the frame is assigned. If the port is an untagged member, the egress frame will be stripped of the VLAN tag and forwarded as untagged. However, if the port is a tagged member, the egress frame is forwarded as tagged.

Sample VLAN Configurations

To illustrate how you can segment network devices that are connected to the Switch, the following sample configurations are provided.

Setting Up Two VLANs on the Same Switch

Figure 32 illustrates how you can set up a simple VLAN on the Switch using desktop connections.

Figure 32 Desktop VLAN Configuration

Endstations

Endstations

in VLAN 2

in VLAN 1

Port 1

Port 3

BaselineBaselineSwitchSwitch2250 2250 Plus

Port 26

Server

Server

in VLAN 2

in VLAN 1

If you want to add ports 1, 3, and 26 to VLAN2 (as shown in Figure 32), so that the ports on the default

VLAN1 and the ports on VLAN2 cannot communicate with each other, do the following:

1Create a new VLAN and set the VLAN ID to 2. Refer to “Setup” for instructions. VLAN1 is the default VLAN and already exists.

2Set ports 1, 3, and 26 to associate with the Untagged membership in VLAN2.

3Click Apply.

Ports 1, 3, and 26 now belong to VLAN2, and will not communicate with any other ports, unless you add other ports to the VLAN or change the port configuration.

Setting Up VLAN Across Two Switches

This example explains how you can set up a VLAN across two Switches using Tagged ports. This enables ports that are members of the same VLAN (but are on different switches) to communicate, provided that a port on each Switch is set to Tagged, and that these ports are connected.

Page 40
Image 40
Canton 3C16476CS Sample VLAN Configurations, Setting Up Two VLANs on the Same Switch, Setting Up VLAN Across Two Switches