NOTES:
1.For ¯anged waterbox nozzles, refer to the certi®ed drawings for length addition measurements.
2.Service access should be provided based on American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE) 15, latest edition, National Fire Protection Association (NFPA) 70, and local safety codes.
3.A minimum 6 in. (152 mm) overhead clearance for service rigging is recommended.
4.Certi®ed drawings are available upon request.
5.[ ] indicates millimeters.
HEAT EXCHANGER |
| A (LENGTH) |
| OVERALL | OVERALL |
| NOZZLE PIPE SIZE (in.) | |||||||||||
(Cooler and | 2 Pass* |
| 1 or 3 Pass² | B (WIDTH) | C (HEIGHT) |
| (Nominal Pipe Size) | |||||||||||
Condenser Size) | mm |
| mm | mm | mm |
| ||||||||||||
|
|
|
| |||||||||||||||
| 4159 |
| 4350 | 1800 | 2303 |
| 10 | 8 | 6 | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| HEAT EXCHANGER |
|
|
| A (Length With |
|
|
|
| |||||||||
|
|
| Marine Waterbox Ð Not Shown) |
|
|
|
| |||||||||||
|
| (Cooler and |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| 2 Pass* | 1 or 3 Pass² |
|
|
| ||||||||||
|
| Condenser Size) |
|
|
|
|
| |||||||||||
|
|
|
|
|
|
|
| mm |
| mm |
|
|
| |||||
|
|
|
|
|
| 4512 |
|
| 5017 |
|
|
|
*Assumes both cooler and condenser nozzles on same end of chiller.
²1 or 3 pass length applies if either (or both) cooler or condenser i s a 1 or 3 pass design.
Fig. 7 Ð 23XL Dimensions (Frame 4 Machines)
9