Carrier Access Adit 3104 Rack Mounting Tray, Mounting Ear, in rack, Physical Installation

Physical Installation

Rack Mounting

Rack Mounting

NOTE: Rack mounting kits are available for both 19 and 23 inch racks. 1 Rack Unit (RU) of spacing is required above the Adit 3000 in the Rack Mount Unit.

To rack mount the Adit 3000, follow the instructions below:

1.Attach bracket ears to Rack Mounting Tray using four #10-32 x 1/4” screws on each side. The Mounting Ears can be used for both a 19 or 23 inch rack. The drawing below shows a top view of the 2 versions.

Rack Mounting Tray Mounting Ear

screws

Mounting Ear

screws

Mounting Ear

Rack Mount Tray

Front

Rack Mount Tray

Front

23 in rack

screws

Mounting Ear

19 in rack

screws

Mounting Ear

2.Attach the Rack Mounting Tray assembly (with mounting ears attached) to rack, using four #10-32 x 1/4” screws (two on each mounting ear).

3.Remove wall mount and screws, if attached, from Adit 3000 unit.

Note: Adit 3000 and wall mounting bracket are not assembled from the factory.

2-6 Adit 3104 - Release 1.6