Carrier Access Adit 3104 Reset Button, Alarm/Status LEDs, Electrical Installation & Cabling

Electrical Installation & Cabling

Reset Button

Reset Button

The system can be reset by pressing the reset button located on the front panel.

Alarm/Status LEDs

LED	State	Description
Critical	Off	No critical alarms present
	Red	Critical alarms present. Critical alarms include:
		user-configured manor environmental inputs.
Major	Off	No major alarms present
	Red	Major alarm present. Major alarms include:
		user-configured manor environmental inputs, DS1 short, DS1 open, DS1
		facility alarm, DS1 RAI, DS1 AIS, DS1 LOF, DS1 LOS, WAN fault,
		Ethernet fault and dead card alarms.
Minor	Off	No minor alarms present
	Red	Minor alarms present. Minor alarms include:
		user-configured minor environmental inputs, DS1 excessive line code
		violations.
Status	Off	No power to system
	Green	Application running, no detected system problems.
	Green Flashing	Power-On Self Test (POST) successful. System booted. Loading
		Application.
	Green/Yellow	Flashing alternate colors. Application Self Test in Process.
	Yellow	Yellow while booting. If this stays a steady yellow the Power-On Self Test
		(POST) failed.
	Yellow Flashing	Power-On Self Test (POST) In Process.
	Red	System Failure

Adit 3104 - Release 1.6 3-9