Carrier Access Adit 3104 user manual 10/100Base-TX Ethernet, Ethernet RJ-45

Electrical Installation & Cabling

Interface Connectors

10/100Base-TX Ethernet

The 10/100Base-TX Ethernet (female) ports provide connectivity for Router
WAN and/or LAN ports and for management connection via Telnet and/or
SNMP to a Network Management System.
Ethernet (RJ-45)				8	1
The pinouts are as follows:
Note: This is a hub pinout, you will need a straight cable to connect to a PC.
	Pin	Name	Description
	1	Receive +	Receive from network
2	Receive -	Receive from network
3	Transmit +	Transmit to network
4-5	N/C	Not connected
6	Transmit -	Transmit to network
7-8	N/C	Not connected

The LEDs are as follows:

LED	State	Description
Left LED	The left LED shall show Link Status.
	Off	Link Down
	Green	Link Up
	Flashing Green	Traffic on Link
	Yellow	Collision status
Right LED	The right LED shall	indicate Link Speed.
	Off	10 Mbit/sec, down or not connected
	Green	100 Mbit/sec

3-8 Adit 3104 - Release 1.6