Configuration
PC Network Configuration
PC Network Configuration
When a PC is connected directly or indirectly to the Adit 3104 Ethernet LAN port
Note: For either of these cases, the PC must be configured as a DHCP Client. This configuration principle is identical but performed differently on each OS.
Windows XP
1.Access Network Connections from the Control Panel.
2.
3.From the General tab select the Internet Protocol (TCP/IP) component and press the Properties button.
4.The Internet Protocol (TCP/IP) properties will be displayed and the following must be selected.
Select the Obtain an IP address automatically.
Select the Obtain DNS server address automatically.
5. Continue on the following setup for a LAN Connection.
Windows 2000/98/Me
1.Access Network and Dialing Connections from the Control Panel.
2.
3.Select the Internet Protocol (TCP/IP) component and press the Properties button.
4.The Internet Protocol (TCP/IP) properties will be displayed and the following must be selected.
Select the Obtain an IP address automatically.
Select the Obtain DNS server address automatically.
5. Continue on the following setup for a LAN Connection.
Windows NT
1.Access Network from the Control Panel to display the network control panel.
2.From the Protocol tab select the Internet Protocol (TCP/IP) component and press the Properties button.
3.From the IP Address tab select Obtain an IP address automatically.
4.From the DNS Address tab verify that no DNS server is defined in the DNS Service Search Order field, and no suffix is defined in the Domain Suffix Search Order field.
5.Reboot
6.Continue on the following setup for a LAN Connection.
Adit 3104 - Release 1.6 |
