Carrier Access Adit 3104 user manual Log in, Configuration

Configuration

Log in

Log in

After successful connection, via telnet or HyperTerm, the user must login. Default Logins are: Login: admin

Password: admin123

After successful login the prompt will be displayed as follows: Adit 3104>

Note: It is recommended that you change your password from the default. See the following to modify the Admin level password on your system.

GUI interface - see Advanced/Users window

CLI interface - use the Adit 3000(config)#username command

4-6 Adit 3104 - Release 1.6