Casio AT-3, AT-5 manual 102

Using the Pattern Sequencer

3. Use buttons L-13 (INTRO) through L-16	(3) Press the R-14(–, +) buttons at the same time.
(SYNCHRO/ENDING) to select the	• This changes the “Part” setting to “Sol”, which
accompaniment pattern you want to play. If you	indicates that the selected instrument part will be
want to play the INTRO accompaniment pattern,	sounded alone (solo).
for example, press the L-13 (INTRO) button.

•	Each press of the L-14(NORMAL/FILL-IN)button		• To return all parts to their original (non-solo) status,
	toggles between NORMAL and NORMAL FILL-IN, and
			press the R-14(–, +) buttons at the same time or
	each press of the L-15 (VARIATION/FILL-IN) button
			press either of the R-17 (u, i) buttons.
	toggles between VARIATION and VARIATION FILL-IN.
			6. Repeat steps 3 through 5 as required to
•	The indicator for the currently selected accompaniment
	pattern will flash on the display.		determine which accompaniment patterns you
Selecting this accompaniment		Causes this indicator	want to edit and which parts you want to
	pattern:	to flash:	re-record.
INTRO		E	• If you want to proceed directly into the editing operation
			from this point, perform the procedure under “To edit an
NORMAL		F
			existing rhythm” (page E-102). If you do, you can either
NORMAL FILL-IN		F G	allow the accompaniment pattern to continue to play, or
			you can stop playback by pressing the L-17 (START/
VARIATION		H
			STOP) button.
VARIATION FILL-IN		G H
			7. To exit this procedure without going directly
ENDING		J
			into the editing operation, press the C-4
4. Press the L-17 (START/STOP) button.
			(PATTERN SEQUENCER) button.
•	The specified accompaniment pattern plays back in a		• If the accompaniment pattern is playing when you press
	loop. To sound bass and chord notes, play a chord on		the C-4 (PATTERN SEQUENCER) button, playback
	the chord keyboard.		will stop, the display will exit the pattern sequencer
•	Each press of the L-17 (START/STOP) button during		screen, and the screen that was displayed in step 1 of
	the following operation starts or stops playback.		this procedure will appear.

5.If you want to hear the notes of a particular instrument part played alone, perform the following steps.

(1)Use the R-17 (u, i) buttons to select the instrument part you want to hear played alone.

•The name of the instrument part you select will appear on the display.

Selecting this	Causes this name to
instrument part:	appear on the display:
Percussion	PERC
Drums	DRUM
Bass	BASS
Chord 1 to Chord 5	CHORD1 to CHORD5

(2)Press the C-7 (MIXER) button and then press the R-17 (y) button to move the 0 to “Part”.

E-100