Using the Function Menu

 

 

 

 

 

4. Use the R-17 (t, y) buttons to select the

AutoPower (Auto Power Off)

 

operation you want.

 

Specifies if Auto Power Off (page E-13) is enabled (on*) or

 

 

 

 

 

 

disabled (oFF). Even when “on” is selected for this setting,

 

 

To do this:

Move the 0 here:

you can temporarily disable Auto Power Off by holding down

 

Return the power on default settings

Clear

the L-4 ([A] POPS/ROCK/DANCE) button as you press the

 

 

to the factory default settings (clearing

 

L-1 (POWER) button to turn on power.

 

 

 

default settings).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rewrite the power on default settings

Store

AutoResume (Auto Resume)

 

 

with the Digital Keyboard’s current

 

Specifies whether the Digital Keyboard should remember its

 

 

 

setup (registering default settings).

 

setup when turned off and restore it the next time it is turned

 

 

 

 

 

• For information about the setting items that are

on.

 

 

registered as default settings, see “Parameter List”

oFF* : Restores power on defaults when power is turned on.

 

on : Remembers setup when power is turned off and

 

(page E-158).

 

 

 

 

 

 

 

restores it when power is turned back on.

 

5. After everything is the way you want, press the

 

 

 

 

 

 

 

 

 

 

R-16 (ENTER) button.

 

 

 

 

 

 

• The message “Complete” appears and the display

 

 

 

 

 

 

 

 

 

•

For information about the setting items that are restored

 

returns to the screen before you pressed the R-16

 

 

when Auto Resume is enabled, see “Parameter List” (page

 

 

 

 

(ENTER) button in step 3.

 

 

 

E-158).

 

 

 

 

 

 

 

 

•

Initially, power on default settings are the same as the

 

6. To exit the function menu, press the R-13

 

 

factory default settings. You also can use the procedure

 

 

 

 

(FUNCTION) button.

 

 

 

below to specify other power on default settings to suit your

 

 

 

 

 

 

 

 

 

 

needs.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• If you want the default settings to be restored whenever

Default (Default Settings)

You can use this setting item to do the following.

 

power is turned on, select “oFF” for the “AutoResume”

 

setting (page E-129).

 

•

Rewrite the power on default settings with the Digital

 

 

 

 

 

 

 

 

Keyboard’s current setup (registering default settings).

 

 

 

 

 

 

 

Initialize (Initialize)

 

•

Return the power on default settings to the factory default

 

 

 

 

 

 

 

 

settings (clearing default settings).

 

This item can be used to initialize all data and settings, or

 

 

 

 

 

parameter settings only.

 

■To register or clear default settings

1.

Press the R-13 (FUNCTION) button to display

 

 

 

 

 

 

 

 

 

 

 

 

• For information about what settings are initialized when

 

the function menu.

 

 

“Parameter” is selected for initialization in step 4 of the

 

 

 

2.

Use the R-17 (i, y) buttons to move the 0to

 

procedure below, see “Parameter List” (page E-158).

 

 

 

 

“General” and then press the R-16 (ENTER)

 

 

 

 

button.

 

 

 

3.

Use the R-17 (t, y) buttons to move the 0to

 

 

 

 

“Default” and then press the R-16 (ENTER)

 

 

 

 

button.

 

 

 

 

• This displays the default setting screen like the one

 

 

 

 

shown below.

 

 

 

E-129