Using the Pattern Sequencer

 

To copy preset or user rhythm instrument

 

5. Specify a rhythm number, accompaniment

 

 

 

pattern, and instrument part as the copy

 

part data to a rec area

 

 

 

destination.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Use the R-17 (t, y, u, i) buttons to select one of

 

 

 

• This procedure copies note events only.

 

the items described in the table below and then use the

 

dial or R-14(–, +) buttons to change the setting.

• You will not be able to perform this procedure if an

 

 

 

 

 

INTRO or ENDING is selected as the accompaniment

 

Display: Item name

Setting Range

 

pattern.

 

1Copy source rhythm

A:001 to F:100

• When a percussion part or drum part is specified as the

 

 

number

 

 

copy destination instrument part, you can specify a

 

 

 

 

 

 

 

 

2Copy source

normal (NORMAL),

 

percussion part or drum part as the copy source. When

 

 

a bass part or a chord part (chord 1 through chord 5) is

 

accompaniment

nrmFil (NORMAL FILL-IN),

 

specified as the copy destination, you can specify a

 

pattern

Variat (VARIATION),

 

bass part or a chord part (chord 1 through chord 5) as

 

 

VarFil (VARIATION FILL-IN)

 

the copy source. No other part combinations are

 

3Copy source part

Percus (Percussion),

 

allowed.

 

 

Drum (Drums), Bass (Bass),

1. While the pattern sequencer screen is

 

 

Chord1 to Chord5 (Chord 1 to

 

 

Chord 5)

 

displayed, use the L-14 (NORMAL/FILL-IN) or

 

 

 

 

 

6. After the settings are the way you want, press

 

L-15 (VARIATION/FILL-IN) button to select an

 

 

accompaniment pattern, and the R-17 (u, i)

 

the R-16 (ENTER) button.

 

buttons to select an instrument part.

 

7. In response to the “Sure?” message that

 

• The rec area of the accompaniment pattern/instrument

 

 

 

appears, press the R-14 (YES) button to copy or

 

 

part included in the accompaniment pattern is the copy

 

 

 

destinations.

 

the R-14 (NO) button to cancel.

2. While holding down the R-13 (FUNCTION)

 

• The copied instrument part status will become

 

“Recorded Data”.

 

 

button, press the C-4 (EDIT) button to display

 

 

 

 

the edit menu.

 

 

 

3. Use the R-17 (t, y) buttons to move the 0to

 

 

 

 

“PartEdit” and then press the R-16 (ENTER)

 

 

 

 

button.

 

 

 

 

• This displays the “Part Edit” screen.

 

 

 

4. Use the R-17 (y) button to move the 0to

 

 

 

 

“Copy” and then press the R-16 (ENTER)

 

 

 

 

button.

 

 

 

 

• This displays the “Part Copy” screen.

 

 

 

1

2 3

E-114