Casio AT-3, AT-5 manual 47

					Using the Tone Editor
• Cutoff Frequency
				Creating a User Tone
The cutoff frequency is a parameter for adjusting timbre by
cutting any frequency that is higher than a specific frequency.
A larger cutoff frequency produces a brighter (harder) timbre,				User Tone Numbers
while a smaller frequency produces a darker (softer) timbre.
Level			Tone areas numbered L:001 through L:100 are for storage of
			user tones. You can have up to 100 user tones stored in
			memory at one time. You can recall a stored user tone by
			pressing the R-12 ([L] USER TONES) button. See “To select
			a tone” (page E-14).
				To create and save a user tone
		Frequency	1. Select the tone you want to edit in order to
	Cutoff frequency			create your user tone.
			2. Press the C-8 (TONE EDITOR) button.
(3) Tone Pitch Parameters
• Vibrato Type, Vibrato Delay, Vibrato Rate, Vibrato
Depth
These parameters adjust the vibrato effect, which causes
periodic changes in the tone.
• Octave Shift				• This displays the tone editor screen.
This parameter controls the octave of all tones.
							Total number of pages
(4) Tone Characteristic Setting Parameters
					Currently displayed page
• Volume
This parameter controls the overall volume of the tone.
• Touch Sense
This parameter controls changes in volume and timbre in
accordance with the relative amount of pressure applied to
the keyboard keys. You can specify more volume for stronger
pressure and less volume or a lighter pressure, or you can
specify the same volume regardless of how much pressure is
applied to the keys.
• Reverb Send, Chorus Send, DSP Line , DSP Type, DSP
				Parameter name			Current setting
Parameters
						Currently selected parameter
These parameters control the effects applied to tones.
					(Enclosed by thick brackets %).

• You can use the R-17 (u, i) buttons to scroll between pages.

3. Use the R-17 (t, y) buttons to move the 0to the parameter you want to change.

• For information about the operation and the setting range of each parameter, see “Tone Parameter Settings” (page E-47).

B E-45