Playing with an Oriental Scale

Saving Your Current Scale Setup (Scale Memory)

You can use the following procedure to store up to four scale setups in memory for quick and easy recall whenever you want to use them.

1.While holding down the D-5 (STORE) button, press the SCALE MEMORY number button (D-1 through D-4) to which you want to assign the current scale setup.

•This will save the current scale setup to the button you press.

•If there is a setup already assigned to the number key you press, it will be replaced (deleted) by the new

setup.

Example: To assign the current scale setup to the D-2 (2) button.

2.To recall a saved scale setup, press the SCALE MEMORY number button (D-1 through D-4) to which it is assigned.

Specifying whether the Current Scale Settings Should be Applied to Auto Accompaniment (Accomp Scale)

1.While holding down the R-13 (FUNCTION) button, press the C-8 (SCALE) button to display the scale screen.

2.Use the R-17 (y) button to move the 0to “AcmpScale”.

3.Use the dial or the R-14 (–, +) buttons to change the setting value.

To do this:

Select this setting:

Not apply scale settings to Auto

oFF

Accompaniment

 

 

 

Apply scale settings to Auto

on

Accompaniment

 

 

 

4.When the setting is the way you want, press the R-15 (EXIT) button.

•This will return to the screen that was displayed before you displayed the scale screen.

•The above scale on/off setting affects all of the Auto Accompaniment chord parts (Chord 1 through Chord 5) and bass parts (A11 through A16). You also can turn scales settings on or off for each individual part using the Part Parameter (page E-43) “Scale (Part Scale Enable)” setting.

E-25