Casio AT-3, AT-5 manual 106

Using the Pattern Sequencer

8. Repeat steps 4 through 7 for all of the parts you			4. Configure the accompaniment pattern number
	want to edit.		of measure and beat settings.
	• It is recommended that you save the rhythm as a user	(1)		While holding down the R-13 (FUNCTION) button,
	rhythm each time you finish editing each			press the C-4 (EDIT) button to display the edit menu.
	accompaniment pattern. For details about how to do
	this, see “To store an edited or newly created rhythm”
	(page E-106).
9. Repeat steps 3 through 8 to edit all of the
	rhythm’s accompaniment patterns you want.
10. After completing all of the editing you want,
	adjust the tempo of the rhythm as desired.
	• The tempo you set here becomes the initial default	(2)		Use the R-17 (t, y) buttons to move the 0to
	tempo of the accompaniment pattern.
				“ElementEdit” and then press the R-16 (ENTER)
11. For details about how to save the final version
				button.
	of the rhythm as a user rhythm, see “To store			• This displays the “ElementEdit” screen.
		(3)		Use the R-17 (t, y) buttons to select one of the
	an edited or newly created rhythm” (page
				items described in the table below and then use the
	E-106).
				dial or R-14(–, +) buttons to change the setting.
	To create a new accompaniment pattern
			Display: Item name			Setting Range
1. Press the C-4 (PATTERN SEQUENCER) button.			Measure: Number of		INTRO, ENDING: 01 to 16
			measures		NORMAL, VARIATION: 01 to 16
	• This displays the pattern sequencer screen. For details				NORMAL FILL-IN, VARIATION
	about screen contents, see step 2 under “To rehearse				FILL-IN: 01 to 02
	before editing an existing rhythm” (page E-99).
			Beat: Beat		2/4 to 4/4 to 8/4, 2/8 to 16/8
2. Perform the procedure under “To clear all
		(4)		Press the R-15 (EXIT) button twice to exit the edit
	instrument part rec areas included in an
				menu.
	accompaniment pattern” (page E-115).
			5. Use the R-17 (u, i) buttons to select the
	• Select the accompaniment pattern you want to record
			instrument part you want to record.
	anew and then perform the clear operation.
3. Perform the procedure under “To configure					Currently selected instrument part
	pattern rec settings (Rec Menu)” (page E-101).
	• This step is not necessary if you want to perform
	operations using initial default settings or if you want to
	use previous settings without changing them.

Currently selected accompaniment pattern

Currently selected instrument part status (page E-97)

E-104