Casio CW-L300 ■To align blocks within a tape label, Example 2: Aligning blocks within a tape label, FIX, SET, FIX, SET, FIX, AUTO, FORM, B-LENGTH, B-LENGTH, T-LENGTH

7.After selecting the alignment setting, use and to scroll to the B-LENGTHsetting screen.

8.Use and to change the setting to FIX, and then press .

Length value becomes highlighted.

9.Use the number keys, or the (decrease) and (increase) keys to in- crease the length of the block, and then press SET.

•If a block contains multiple lines, you can also align its text using the B-LENGTH AUTO setting. In this case, alignment will be performed on the shorter line of text as shown below.

LEFT EQUAL CENTER RIGHT

Example 2: Aligning blocks within a tape label

LEFT

EQUAL

CENTER

RIGHT

Important!

•The block alignment setting is applied only when FIX is selected for the T-LENGTHsetting.

■To align blocks within a tape label

1.In the Free Design Mode, input the text you want, and divide it into blocks as required.

•See page 22 for information about blocks.

2.Press FORM.

•If your label has only one block, advance directly to step 4 of this procedure.

3.Use and to select ALL FORM, and then press SET.

4.Use and to scroll to the T-LENGTHsetting screen.

5.Use and to change the setting to FIX, and then press .

Length value becomes highlighted.

E30