DISC Mode

Symptom

Possible Cause

Recommended Action

The printing

The ink ribbon is used

Load a new ink ribbon

operation is

up.

cassette (option). (Startup

finished

 

Guide, page 11)

normally,

 

 

but nothing

 

 

is printed.

 

 

 

 

 

Printing is

Any of the following

Use a disc that meets the

not clear.

can interfere with

requirements described in the

Printing is

proper printing.

bundled “Printing Precautions”

poor

• A disc printing

or at the following Internet

quality.

surface that is not

URL.

Printing is

smooth and flat

http://world.casio.com/ds/

too light.

• A disc printing

media/

 

surface that has a

You can also try adjusting the

 

design or lines

print density to make it darker.

 

printed on it

(page 55)

 

• A disc printing

 

 

surface that

 

 

supports ink jet

 

 

printing only

 

 

 

 

 

The ink ribbon

Re-load the ink ribbon

 

cassette is not loaded

cassette properly.

 

properly.

 

 

 

 

The printed

The color of the final

Try using a lighter color disc or

color is

printout is affected by

a darker color ink ribbon.

different

both the color of the

 

from the ink

ink ribbon and the

 

ribbon

color of the disc you

 

color.

are printing on.

 

 

 

 

Symptom

Possible Cause

Recommended Action

The printing

Improper alignment of

Use the positioning guide

is not

the disc when it is

when aligning the disc.

positioned

placed in the printer.

(Startup Guide, page 21)

correctly on

 

 

the disc.

 

 

 

 

 

The disc

The power cord plug

Correctly connect the power

stops part

or the AC adaptor is

cord and the AC adaptor.

way

not plugged in as far

(Startup Guide, page 7)

through

as it will go.

 

printing.

 

 

The printer is

If you cannot easily remove

 

 

malfunctioning.

the disc from between the

 

 

print head and roller, do not try

 

 

to force it. Insert a thin object

 

 

into the print head release

 

 

button hole (Startup Guide,

 

 

page 4) and press to release

 

 

the print head. This should

 

 

allow you to remove the disc.

 

 

After removing the disc, press

 

 

the release lever inside the

 

 

cassette case (Startup Guide,

 

 

page 4) to its original position

 

 

before trying to print again. If

 

 

you are still unable to remove

 

 

the disc from the printer,

 

 

contact your retailer or your

 

 

nearest CASIO service center.

 

 

 

 

Battery power is low or

Use the bundled AC adaptor

 

the wrong type of

to power the printer, or replace

 

batteries are loaded in

the current batteries with a

 

the printer.

fresh set of AA-size alkaline

 

 

batteries.

 

 

 

E60