Casio CW-L300 Error Messages, SET, ESC, See page:, See page:

Error Messages

Message	Cause and Action	See page:
DATA ERROR!	• You are trying to operate the	Startup
INITIALIZE THE	printer without initializing its	Guide,
PRINTER!	memory first.	page 8
	➜ Initialize printer memory.
ENTIRE PHRASE	• The text in the phrase	46
COULD NOT BE	memory you are trying to
RECALLED!	recall will cause the number
	of characters to exceed the
	allowable limit for the location
	where you are inserting it.
	➜ Re-input so the recalled
	phrase memory text does not
	cause the allowable number
	of characters to be exceeded.
ILLEGAL	• You are attempting to input	36
CHARACTERS!	characters that are not
	allowed for bar code printing.
	➜ Delete the disallowed
	characters.
	• For a CODABAR barcode,
	you are trying to use a
	character other than A, B, C,
	or D as the start code or stop
	code.
	➜ Re-input the correct
	character.
	• In the case of a numbering	17
	label, you are trying input a
	space after a number.
	➜ Delete the space after the
	number.

Message	Cause and Action	See page:
INPUT A VALUE!	• You are trying to print	17
	numbering labels without any
	input.
	➜ Input the numbers you want.
LABEL LONGER THAN	• To print, press SET.	26
SETTING	• To cancel printing, press
SET/ESC	ESC. You can then decrease
	the number of characters,
	change to a longer tape
	setting, or select auto tape
	length.
LENGTH OF PRINT IS	• You are trying to print	26
TOO LONG!	something that is longer than
	the length of tape available.
	➜ Make the label shorter or
	reduce the number of copies.
LINK ERROR!	• The USB cable is not	Read this
CHECK ALL	connected securely to the	first
CONNECTIONS!	USB port.
	➜ Plug the USB cable securely
	into the USB port.
	• The computer is shut down.
	➜ Start up the computer.
LOAD A TAPE	• There is no tape cartridge	Startup
CARTRIDGE	loaded in the printer or the	Guide,
	tape cartridge is not loaded	page 13
	correctly.
	➜ Check the tape cartridge.

63 E