Casio CW-L300 and, page, PRINT, Guide, pages, Guide, PRINT, memory, DIGITS, SET/ESC, NO DATA, Startup, Startup, operation, of digits, previewing, NOT ENOUGH, next print

Message	Cause and Action	See page:
LOW BATTERY!	• Battery power is low.	57
	➜ Replace the batteries or use
	the bundled AC adaptor to
	power the printer.

•Temperature is below 10˚C (50˚F)

➜Move the printer to a location where the temperature is within the operating temperature range (10˚C to 35˚C (50˚F to 95˚F)).

LOW BATTERY!	• Battery power is low.	57
CONTINUE TO	➜ Replace the batteries or use
PRINT?	the bundled AC adaptor to
SET/ESC	power the printer.

•Temperature is below 10˚C (50˚F)

➜Move the printer to a location where the temperature is within the operating temperature range (10˚C to 35˚C (50˚F to 95˚F)).

MEMORY FULL!	• There is not enough memory 54
	available to save the data
	you are trying to save.
	➜ Delete memory data you no
	longer need and try again.

Message	Cause and Action	See page:
NO DATA!	• You are trying to perform a	45
	recall, edit, or delete
	operation on a phrase
	memory that does not
	contain any data.
	➜ Select a different phrase
	memory.
	• You are trying to recall or
	delete memory data when
	there is no data in memory.
	➜ Store data in memory before
	performing the current
	operation.
NO INPUT TEXT!	• You are attempting a print or	Startup
	preview operation when	Guide,
	there is no text input.	pages 20
	➜ Input text before printing or	and 24
	previewing.
NOT ENOUGH	• You are trying to print a bar	36
DIGITS!	code that does not have the
	required number of digits.
	➜ Re-input the correct number
	of digits.
NOT ENOUGH INK	• There is not enough ink	Startup
RIBBON FOR NEXT	ribbon left to perform the	Guide,
PRINT	current print job.	page 11
	➜ After printing finishes,
	replace the ink ribbon
	cassette before starting the
	next print.

E64