Casio CW-L300 FREE DESIGN: Aligning Tape Label Text, ■To align tape label text, ■To control the overall label length using a fixed tape length, SET, FIX, SET, SET, FORM

■To control the overall label length using a fixed tape length

1.In the Free Design Mode, input the text you want.

2.Press FORM.

•If your label has only one block, advance directly to step 4 of this procedure.

3.Use and to select ALL FORM, and then press SET.

4.Use and to scroll to the T-LENGTHsetting screen.

5.Use and to change the setting to FIX, and then press .

6.Use the number keys, or the (decrease) and (increase) keys to change the label length setting.

Length value becomes highlighted.

•The appearance of the tape length value on the display will change in accordance with your setting as described below.

[20.6cm]	20.5cm]
➜	➜
Label can be printed	Label will be printed but the tape length
as specified.	will be longer than specified.

FREE DESIGN: Aligning Tape Label Text

This section explains how to align tape label text within a block and how to align blocks within a tape label.

Example 1: Aligning the term “Round Estimate1” in a block (fixed block length)

LEFT

EQUAL

CENTER

RIGHT

■To align tape label text

1.In the Free Design Mode, input the text you want, and divide it into blocks as required.

•See page 22 for information about blocks.

2.Move the cursor the block whose text you want to align, and then press FORM.

•Here we will move the cursor to the block that contains “Round”.

•If your label has only one block, advance directly to step 5 of this procedure.

3.Use and to select BLOCK FORM, and then press SET.

4.Use and to select ONE BLOCK, and then press SET.

5.Use and to scroll to the ALIGN setting screen.

6.Use and to select the alignment setting you want.

•Each press or and cycles the setting between EQUAL, CENTER, RIGHT, and LEFT.

29E