Manuals / Brands / Computer Equipment / Printer / Casio / Computer Equipment / Printer

Casio CW-L300 Fixed Block Length and the Label Format Indicator

1 78

Download 78 pages, 1.06 Mb

8.Press .

Length value becomes highlighted.

9.Use the number keys, or the (decrease) and (increase) keys to change the block length setting.

•The appearance of the block length value on the display will change in accordance with your setting as described below.

[11.6cm]

➜

Label can be printed as-is.

(9.6cm]

➜

Text is condensed horizontally, and label is printed as-is.

5.4cm]

➜

Block length is printed longer than specified length value.

10.Press SET.

Fixed Block Length and the Label Format Indicator

Selecting FIX for the B-LENGTHsetting causes the label format indicator in the upper right corner of the display to indicate the information described below.

Label can be printed	Label will be	Label will be longer
at specified length.	printed at specified	than specified
	length with	length.*
	condensed
	condensed
	characters.

*Text is printed at 50% normal size in the printing direction. The printed block length is longer than the specified length.

E28

Contents

RJA514733-10 NOTICE •Reorient or relocate the receiving antenna •Increase the separation between the equipment and receiver •Consult the dealer or an experienced radio/TV technician for help FCC WARNING Read This First Safety Precautions Danger Alkaline Batteries 1.Do not rub your eyes! Rinse them with water 2.Contact your physician immediately Leaving alkaline battery fluid in your eyes can lead to loss of sight Dropping and rough treatment Do not disassemble or modify the product Water and foreign objects Do not incinerate Plastic bag precaution Connection precaution Keep backup copies of all important data Keep heavy objects off Location Avoid unstable surfaces Operating Precautions Contents Creating Disc Label Data Built In Logos Output Samples Example 1: Aligning the term “Round Estimate1” in a block (fixed block length) Example 2: Aligning blocks within a tape label Specifying the Size of a String of Characters Specifying the Size of Text Lines Demo Printing DISC Mode TAPE Mode Part 1 - DISC Mode Disc Printing Terms DISC Mode Creating a New Label 5.Press SET ■Label Formats If you want to do this: Select this type of format: Input text only FORMAT 1 through FORMAT Inserting a Logo Into a Label Inputting Text into an AUTO Format Specifying Character Spacing Specifying Text Alignment Printing Disc Case Labels 4.Use and to select PRINT, and then press SET 5.Use and to select TAPE, and then press SET •Pressing and toggles the selection on the above screen between DISC and TAPE To print this data: Upper label area Part 2 - TAPE Mode Creating a Tape Label Creating and Printing a Sequentially Numbered Tape Label Input the text for the COMMENT 1 box, and then press 7.Change the starting number, if you want, and then press SET 8.Input the text for the COMMENT 2 box, and then press SET •Here we will input “Receipt” Controlling the Appearance of Your Labels •Direction (horizontal or vertical) •Mirror printing (off or on) •Margin size See page 25 for information about how to configure these settings Creating and Printing a Large Tape Label Creating and Printing a Tape Label with a Logo ■To create and print a label with a logo 5.Use the cursor keys to select the logo you want to use, and then press SET Creating and Printing an Original (Free Design) Tape Label FREE DESIGN: Using Text Blocks FREE DESIGN: Using Multiple Lines in a Tape Label 1.In the Free Design Mode, input the first line of text • Here we will input “New Branch” 2.Press The newline mark indicates a newline operation Other Tape Label Examples Insert block mark (page 22) Specify different character sizes for each line (page 31) FREE DESIGN: Configuring Block Form Settings FREE DESIGN: Configuring Label Form Settings ■To configure label form settings 1.In the Free Design Mode, input the text you want 2.Press FORM FORM FREE DESIGN: Controlling the Length of a Tape Label Fixed Block Length and the Label Format Indicator FREE DESIGN: Aligning Tape Label Text AUTO Example 2: Aligning blocks within a tape label ■To align blocks within a tape label B-ALIGN FREE DESIGN: Changing the Size of Tape Label Text Specifying the Size of a String of Characters ■To specify the size of a string of characters SIZE HEIGHT WIDTH Specifying the Size of Text Lines Example: LINE Small Font FREE DESIGN: Using Frames Creating a Barcode Tape Label Barcode Specifications Barcode Check Printed Number Using Tape Labels ■FULL+HALF CUT ■FULL CUT •FULL CUT performs a full cut at the end of each label •Use this setting when printing on iron transfer tape When using the Cut Modes and Margins Part 3 - Inputting and Editing Label Text Moving the Cursor Basic Alpha Numeric Input Inputting Symbols and Special Characters Inputting Illustrations Deleting an Individual Character Clearing Input Text Text Editing Using Phrase Memory To edit a phrase memory record EDIT To delete a phrase memory record DELETE Using Copy and Paste User Characters Do this: ■To create a user character using an existing character 2.Press FUNCTION and then USER CHR USE INPUT CHAR ■To create a user character using user character you created previously To recall a user character USER CHR RECALL To delete a user character Part 4 - Controlling the Appearance of Text Selecting a Font To change the default font setting 2.Use and to select DEFAULT FONT and then press SET To change the font of text you have just input 1.After inputting the text you want, press FONT 2.Use and to select the font you want to change to and then press SET Using STYLE Menu Attributes Using EFFECT Menu Attributes Part 5 - Saving, Recalling and Deleting Labels Part 6 - Configuring the Printer Setup ■To configure the printer setup 2.Press FUNCTION and then SET UP 4.Use the cursor keys to change it When this setting ■To perform tape demo printing CONT HALF CUT Reference Power Requirements Caring for the Printer Troubleshooting DISC Mode TAPE Mode PRINT setting to NARROW, MEDIUM FULL CUT or UNCUT setting to CONT HALF CUT or FULL+HALF CUT Error Messages LOW BATTERY • Battery power is low ➜ Replace the batteries or use the bundled AC adaptor to power the printer Page Page (from NARROW to MEDIUM Illustrations Symbols, Dingbats, and Special Characters Frames Disc Label Formats Numbering Formats Tape Width and the Number of Lines and Character Sizes Supported Tape Widths Enlarged Label Printing Tape Widths and Character Sizes Specifications Page 6-2, Hon-machi 1-chome Shibuya-ku,Tokyo 151-8543,Japan