Manuals / Brands / Computer Equipment / Printer / Casio / Computer Equipment / Printer

Casio CW-L300 Reference, Power Requirements, Battery Life, ■Using Batteries, Note, Important, Disc Label Printing, Label Tape Printing, 3.Replace the battery cover

1 78

Download 78 pages, 1.06 Mb

Reference

Power Requirements

You can run the printer by using its bundled AC adaptor to plug it into a power outlet. It can also run on commercially available alkaline batteries.

■Using Batteries

Note

•The printer can run on eight AA-size alkaline batteries. Be sure to use alkaline batteries only.

1. Turn over the printer and remove the battery cover.

• Never bend or twist the battery cover, or otherwise subject it to rough handling. Doing so creates the risk of printer malfunction.

2. Load a set of eight new batteries.

• Make sure the positive gand negative h poles of the batteries are facing in the proper directions.

3.Replace the battery cover.

Important!

•The printer may suddenly turn off during printing if battery power goes low. Because of this, use of the bundled AC adaptor is recommended to power the printer.

•Because of the affect cold has on batteries, the “LOW BATTERY!” may appear prematurely when the temperature is below 10˚C(50˚F). If this happens, move the printer to a location where the temperature is within the operating temperature range (10˚C to 35˚C (50˚F to 95˚F))

Battery LifeDisc Label Printing•Printing of approximately 150 discs*Normal temperature (20˚C (68˚F)), one printing per disc.Label Tape Printing

•Printing of approximately two 18mm tape cartridges under standard printing conditions*

*When printing text or graphics that contain large areas of black, and printing under cold temperatures can shorten battery life for both disc label printing and label tape printing.

57E

Contents

RJA514733-10 NOTICE •Reorient or relocate the receiving antenna •Increase the separation between the equipment and receiver •Consult the dealer or an experienced radio/TV technician for help FCC WARNING Read This First Safety Precautions Danger Alkaline Batteries 1.Do not rub your eyes! Rinse them with water 2.Contact your physician immediately Leaving alkaline battery fluid in your eyes can lead to loss of sight Dropping and rough treatment Do not disassemble or modify the product Water and foreign objects Do not incinerate Plastic bag precaution Connection precaution Keep backup copies of all important data Keep heavy objects off Location Avoid unstable surfaces Operating Precautions Contents Creating Disc Label Data Built In Logos Output Samples Example 1: Aligning the term “Round Estimate1” in a block (fixed block length) Example 2: Aligning blocks within a tape label Specifying the Size of a String of Characters Specifying the Size of Text Lines Demo Printing DISC Mode TAPE Mode Part 1 - DISC Mode Disc Printing Terms DISC Mode Creating a New Label 5.Press SET ■Label Formats If you want to do this: Select this type of format: Input text only FORMAT 1 through FORMAT Inserting a Logo Into a Label Inputting Text into an AUTO Format Specifying Character Spacing Specifying Text Alignment Printing Disc Case Labels 4.Use and to select PRINT, and then press SET 5.Use and to select TAPE, and then press SET •Pressing and toggles the selection on the above screen between DISC and TAPE To print this data: Upper label area Part 2 - TAPE Mode Creating a Tape Label Creating and Printing a Sequentially Numbered Tape Label Input the text for the COMMENT 1 box, and then press 7.Change the starting number, if you want, and then press SET 8.Input the text for the COMMENT 2 box, and then press SET •Here we will input “Receipt” Controlling the Appearance of Your Labels •Direction (horizontal or vertical) •Mirror printing (off or on) •Margin size See page 25 for information about how to configure these settings Creating and Printing a Large Tape Label Creating and Printing a Tape Label with a Logo ■To create and print a label with a logo 5.Use the cursor keys to select the logo you want to use, and then press SET Creating and Printing an Original (Free Design) Tape Label FREE DESIGN: Using Text Blocks FREE DESIGN: Using Multiple Lines in a Tape Label 1.In the Free Design Mode, input the first line of text • Here we will input “New Branch” 2.Press The newline mark indicates a newline operation Other Tape Label Examples Insert block mark (page 22) Specify different character sizes for each line (page 31) FREE DESIGN: Configuring Block Form Settings FREE DESIGN: Configuring Label Form Settings ■To configure label form settings 1.In the Free Design Mode, input the text you want 2.Press FORM FORM FREE DESIGN: Controlling the Length of a Tape Label Fixed Block Length and the Label Format Indicator FREE DESIGN: Aligning Tape Label Text AUTO Example 2: Aligning blocks within a tape label ■To align blocks within a tape label B-ALIGN FREE DESIGN: Changing the Size of Tape Label Text Specifying the Size of a String of Characters ■To specify the size of a string of characters SIZE HEIGHT WIDTH Specifying the Size of Text Lines Example: LINE Small Font FREE DESIGN: Using Frames Creating a Barcode Tape Label Barcode Specifications Barcode Check Printed Number Using Tape Labels ■FULL+HALF CUT ■FULL CUT •FULL CUT performs a full cut at the end of each label •Use this setting when printing on iron transfer tape When using the Cut Modes and Margins Part 3 - Inputting and Editing Label Text Moving the Cursor Basic Alpha Numeric Input Inputting Symbols and Special Characters Inputting Illustrations Deleting an Individual Character Clearing Input Text Text Editing Using Phrase Memory To edit a phrase memory record EDIT To delete a phrase memory record DELETE Using Copy and Paste User Characters Do this: ■To create a user character using an existing character 2.Press FUNCTION and then USER CHR USE INPUT CHAR ■To create a user character using user character you created previously To recall a user character USER CHR RECALL To delete a user character Part 4 - Controlling the Appearance of Text Selecting a Font To change the default font setting 2.Use and to select DEFAULT FONT and then press SET To change the font of text you have just input 1.After inputting the text you want, press FONT 2.Use and to select the font you want to change to and then press SET Using STYLE Menu Attributes Using EFFECT Menu Attributes Part 5 - Saving, Recalling and Deleting Labels Part 6 - Configuring the Printer Setup ■To configure the printer setup 2.Press FUNCTION and then SET UP 4.Use the cursor keys to change it When this setting ■To perform tape demo printing CONT HALF CUT Reference Power Requirements Caring for the Printer Troubleshooting DISC Mode TAPE Mode PRINT setting to NARROW, MEDIUM FULL CUT or UNCUT setting to CONT HALF CUT or FULL+HALF CUT Error Messages LOW BATTERY • Battery power is low ➜ Replace the batteries or use the bundled AC adaptor to power the printer Page Page (from NARROW to MEDIUM Illustrations Symbols, Dingbats, and Special Characters Frames Disc Label Formats Numbering Formats Tape Width and the Number of Lines and Character Sizes Supported Tape Widths Enlarged Label Printing Tape Widths and Character Sizes Specifications Page 6-2, Hon-machi 1-chome Shibuya-ku,Tokyo 151-8543,Japan